grand dink 125 mmc 1 Werkstatthandbuch : Seite 203

                    14.STEERING HANDLEBAR/FRONT WHEEL/FRONT
   BRAKE/FRONT SHOCK ABSORBER/FRONT FORK                        GRAND DINK 125/150



 ASSEMBLY
 Install the damper spring onto the damper rod
 and then install them into the front shock
 absorber tube.
 Install the shock absorber spring onto the
 front shock absorber tube.
 Set the front shock absorber tube in a vise
 and then tighten the lock nut.
 When holding the shock absorber tube,
    place a shop towel to protect it and do
    apply too much force .

 Set the front shock absorber in a vise.
 Insert the shock absorber tube into the shock
 absorber and then install the copper washer
 and tighten the damper rod hex bolt.
 Apply locking agent to the washer and
    hex bolt and install them together.
 Add engine oil into the front shock absorber.
 Torque: 4.929.4N-m
 Specified Oil: SAE30
                                                 Hex Bolt   Copper Washer

                                                  Circlip          Dust Boot
 Oil Capacity: 81cc
 Install the oil seal
 Install the circlip.
 Install the dusts seal and dust boot.




                                                                      Dust Seal

 INSTALLATION
 Install the front shock absorbers onto the
 front fork.
 Install and tighten the front shock absorber
 upper mount bolts.
 Tighten the lower mount bolts.
 Align the upper mount bolt hole with the
    groove on the front fork.
 Install the front wheel. ( 14-7)


                                                                               14-16
                
Wir verwenden auf unserer Website Cookies, um Statistiken über die Besuche zu sammeln. Mit dem Klick auf Ich akzeptiere oder mit dem Fortfahren auf dieser Seite akzeptieren Sie die Verwendung dieser Cookies.