grand dink 125 mmc Werkstatthandbuch : Seite 56

          4. LUBRICATION SYSTEM                                                     GRAND DINK 125/150



  ENGINE OIL/OIL FILTER
 · Place the motorcycle upright on level
      ground for engine oil level check.
    · Run the engine for 23 minutes and
      check the oil level after the engine is
      stopped for 23 minutes.

  Remove the oil dipstick and check the oil
  level with the oil dipstick.
  If the level is near the lower level, fill to the
  upper level with the recommended engine oil.          Oil Dipstick
  OIL CHANGE
 · The engine oil will drain more easily
      while the engine is warm.
  Remove the oil drain bolt located at the left
  side of the engine to drain the engine oil.
  After the oil has been completely drained,
  install the aluminum washer and tighten the
  oil drain bolt.
  Torque: 14.7N-m
  Pour the recommended oil through the oil
  filler hole.
                                                                              Oil Drain Bolt

  OIL FILTER SCREEN
  Drain the engine oil.
  Remove the oil filter screen cap.
  Remove the oil filter screen and spring.
  Check the oil filter screen for clogging or
  damage and replace if necessary. Check the
  filter screen O-ring for damage and replace if
  necessary.
  Install the oil filter screen, spring, O-ring and
  filter screen cap.
  Torque: 14.7N-m
  Recommended Oil: SAE15W40# API: SG/CD               Oil Filter Screen Cap
     Oil Capacity:
        At disassembly: 1.1 liter
        At change:         0.9 liter
  Start the engine and check for oil leaks.
  Start the engine and let it idle for few minutes,
  then recheck the oil level.




4-3