9. DRIVE AND DRIVEN PULLEYS ATV 300/250 Measure the movable drive face bushing I.D. Service Limit: 27.06 mm (1.0824 in) ASSEMBLY Install the weight rollers into the movable drive face. Install the ramp plate. Check the drive pulley collar for wear or damage. Measure the O.D. of the drive pulley collar sliding surface. Service Limit: 26.94 mm (1.0776 in) INSTALLATION Install the drive pulley face assembly and collar. Install the drive pulley, wash and nut. Washer When installing the drive pulley face, compress it to let the drive belt move downward to the lowest position so that the drive pulley can be tightened. Install the washer with the "OUT SIDE" mark facing out. Do not get oil or grease on the drive belt or pulley faces. Torque: 9.5 kgf-m (95 N-m, 68 lbf-ft) 9-6