kxr maxxer 250 300 Werkstatthandbuch : Seite 148

          12. COOLING SYSTEM                                                                   ATV 300/250

                                                                               Radiator
 RADIATOR
 RADIATOR INSPECTION
 Remove the front fender. (page 2-5)
 Inspect the radiator soldered joints and
 seams for leaks.
 Blow dirt out from between core fins with
 compressed air. If insects, etc., are clogging
 the radiator, wash them off.
 Carefully straighten any bent fins.


                                                           Air Vent Tube   Overflow Tube
 RADIATOR REMOVAL
 Drain the coolant. (page 3-20)
 Remove the front fender. (page 2-5)

 Disconnect the air vent tube from the
 radiator filler.
 Remove the overflow tube clamp and
 disconnect the overflow tube.
 Disconnect the fan motor wire coupler.

                                                                              Fan Motor Coupler
                                                   Bolts                          Bolts
 Remove the two bolts on the radiator filler
 hold plate.
 Remove the two bolts on the radiator.




                                                                              Lower Hose

 Disconnect the thermostatic switch wire
 leads.
 Loosen the hose bands and disconnect the
 upper hose and lower hose from the
 radiator.
 Pull the radiator upward to remove the
 radiator.


                                                  Upper Hose          Thermostatic Switch Lead


                                                                                           12-4