12. COOLING SYSTEM ATV 300/250
Bolts
RADIATOR DISASSEMBLY
Remove the three bolts and then remove the
fan/shroud from the radiator.
Check fan motor by battery.
CHECK THERMOSTATIC SWITCH
When coolant temperature lower then
85~90 the thermostatic switch OFF.
When coolant temperature over 85~90
the thermostatic switch ON.
RADIATOR ASSEMBLY Thermostatic Switch
Install the fan shroud on the radiator with
the three bolts.
RADIATOR INSTALLATION
Reverse the "RADIATOR REMOVAL"
procedures.
Fill the radiator with coolant. (page 3-20)
Connect the vent tube to the radiator filler.
After installation, check for coolant leaks.
If you want to refill the coolant , the
following procedure must be checked.
1. Please make the radiator filler and the
air vent tube to be separated.
2. Then start the engine , filled in the
coolant till the coolant flowed out
from the air vent tube.
3. Put the air vent tube on.
12-5
Alles top und passend 
4.7 / 5