1. Kymco
  2. Werkstatthandbuch
  3. mxu 250 300 2 Werkstatthandbuch
  4. Seite 172

mxu 250 300 2 Werkstatthandbuch : Seite 172

Microfiches
Image preview

Seite 170

Image preview

Seite 171

Image preview
Image preview

Seite 173

Image preview

Seite 174

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315 320 325 330 335 340 345 350 352 
          10.FINAL REDUCTION/
    TRANSMISSION SYSTEM                                           MXU 300/250


 Install the shift cam.
 Install the shift fork.
 Install the guide bar.
 Install the shift shaft.
 Make sure that the lever on the gear
   change switch correctly engages with the
   locating slot on the shift shaft.
   Align the mark on the shift shaft gear
   with the mark on the shift cam gear.
                                                            Gear Change Switch


 Install the shift cam stopper and tighten the
 plug.

 Torque: 4.8 kgf-m (48 Nm, 35 lbf-ft)




                                                                    Dowel Pins
 Install the dowel pins and a new gasket onto
 the right crankcase.
 Install the transmission case cover and tighten
 the transmission case cover bolt.

 Torque: 2.7 kgf-m (27 Nm, 20 lbf-ft)

 Fill the engine with oil and install the oil
 filler bolt. (Refer to the "TRANSMISSION
 OIL REPLACEMENT" section in the chapter
 3)                                                Gasket


 Specified Gear Oil:
 KYMCO SIGMA GEAR OIL 90#
 Oil Capacity (MXU 250):
 At disassembly:
         0.4 liter (0.352 lmp qt, 0.424 US qt)
 At change:
         0.3 liter (0.264 lmp qt, 0.318 US qt)

10-15
 Microfiches.net - Ersatzteilkataloge anderer Marken