1. Kymco
  2. Werkstatthandbuch
  3. mxu 250 300 2 Werkstatthandbuch
  4. Seite 320

mxu 250 300 2 Werkstatthandbuch : Seite 320

Microfiches
Image preview

Seite 318

Image preview

Seite 319

Image preview
Image preview

Seite 321

Image preview

Seite 322

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315 320 325 330 335 340 345 350 352 
          16. BATTERY/CHARGING SYSTEM/
    A.C. GENERATOR                                  MXU 300/250


 BATTERY VOLTAGE (OPEN CIRCUIT
 VOLTAGE) INSPECTION
 Remove the seat.
 Disconnect the battery cables.
 Measure the voltage between the battery
 terminals.
 Fully charged : 13.1V
 Undercharged : 12.3V max
 Battery charging inspection must be
   performed with a voltmeter.




 CHARGING
 Connect the charger positive (+) cable to the
 battery positive (+) terminal.
 Connect the charger negative (-) cable to the
 battery negative (-) terminal.
   · Keep flames and sparks away from a
     charging battery.
   · Turn power ON/OFF at the charger, not
     at the battery terminals to prevent
     sparks near the battery to avoid
     explosion.
   · Charge the battery according to the
     current specified on the battery.

 · Quick charging should only be done in
     an emergency.
   · Measure the voltage 30 minutes after
     the battery is charged.
 Charging current: Standard : 1.2A
                    Quick : 3.0A
 Charging time : Standard : 510 hours
                    Quick : 30 minutes
 After charging: Open circuit voltage: 12.8V min.


                                                        16-6
 Microfiches.net - Ersatzteilkataloge anderer Marken