12. FRONT WHEEL/FRONT BRAKE/ FRONT SUSPENSION MOVIE SYSTEM ASSEMBLY Clean all removed parts. Apply silicon grease to the pistons and oil seals. Lubricate the brake caliper cylinder inside wall with brake fluid. Install the brake caliper piston with grooved side facing out. Install the piston with its outer end protruding 35mm beyond the brake caliper cylinder. Wipe off excessive brake fluid with a clean shop towel. Apply silicon grease to the brake caliper seat pin and caliper inside. Install the brake caliper seat. INSTALLATION Install the brake caliper and tighten the two bolts. Torque: 2.93.5kg-m Bolts Connect the brake fluid tube to the brake caliper and tighten the fluid tube bolt. Torque: 2.53.5kg-m Fill the brake reservoir with recommended brake fluid and bleed air from the brake system. Fluid Tube Bolt Mount Bolts FRONT SHOCK ABSORBER REMOVAL Remove the front cover. Remove the front inner fender. Remove the front wheel. Remove the front shock absorber upper mount bolts. Loosen the lower mount bolts to remove the front shock absorbers. Shock Absorbers 12-13