15. IGNITION SYSTEM MOVIE SYSTEM Ignition Coil IGNITION COIL REMOVAL Remove the frame body cover. Remove the spark plug cap. Disconnect the ignition coil wires and remove the ignition coil bolt and ignition coil. INSPECTION CONTINUITY TEST This test is to inspect the continuity of ignition coil. Measure the resistance between the ignition coil primary coil terminals. Resistance: 0.11.0/20 Measure the secondary coil resistances with and without the spark plug cap. Resistances: (with plug cap): 712K/20 (without plug cap): 35K/20 Correctly operate the tester following the manufacturer`s instructions. 1. Turn the ignition coil tester changeover switch to 12V and connect the ignition coil to the tester. 2. Turn the tester power switch ON and check the spark from the watch window. Good : Normal and continuous spark Faulty : Weak or intermittent spark 15-5