new pulsar 125 Werkstatthandbuch : Seite 124

          12. REAR WHEEL/BRAKE/SUSPENSION                              Pulsar   CK   125


 Apply grease to the brake cam and anchor               Brake Cam
 pin, then install the brake cam to the brake
 panel.




                                                   Brake Panel
                                                                      Brake Arm
 Apply engine oil to the oil seal and install it
 to the brake cam.
 Install the wear indicator plate on the brake
 cam, aligning the mark on the plate with the
 groove on the brake cam.




                                                                    Oil Seal


 Install the brake arm onto the brake cam,
 aligning the punch mark on the cam with the
 scribed line on the arm.
 Install and tighten the brake arm bolt.
 Torque: 0.81.2kg-m




 INSTALLATION
 Install the brake panel and rear wheel in the
 reverse order of removal.
 After the rear wheel installation, check
   the drive chain slack and rear brake
   pedal free play.




12-7