17. STARTING SYSTEM Pulsar CK 125
STARTER RELAY Starter Relay
INSPECTION
Remove the left side cover.
Turn the ignition switch ON and the starter
relay is normal if you hear a "click" when
the starter button is depressed.
If there is no click sound:
· Inspect the starter relay voltage
· Inspect the starter relay ground circuit
· Check for continuity between the starter
relay yellow/red and green/red wire Green/Red Yellow/Red
terminals
Connect a 12V battery across the starter
relay yellow/red and green/red wire
terminals.
Connect an electric tester between the starter
relay large terminals and check for
continuity between the two terminals.
The relay is normal if there is continuity.
Replace the starter relay with a new one if
there is no continuity.
Starter Relay
STARTER MOTOR INSTALLATION
Apply engine oil to the starter motor O-ring
and install the starter motor. Install and
tighten the two mounting bolts.
Torque: 0.81.2kg-m
Install the starter motor cable lock nut and
waterproof cover.
O-ring
17-5
4.7 / 5