3. LUBRICATION SYSTEM Pulsar CK 125
Upper Limit
ENGINE OIL/OIL FILTER
OIL LEVEL
· Place the motorcycle upright on level
ground for engine oil level check.
· Run the engine for 23 minutes and
check the oil level after the engine is
stopped for 23 minutes.
Remove the oil dipstick and use it to check
the oil level.
If the level is near the lower limit, fill to the Lower Limit
upper limit with the specified engine oil.
OIL CHANGE
The engine oil will drain more easily
while the engine is warm.
Remove the drain bolt to drain the engine oil
thoroughly.
Check the drain bolt washer for damage or
deformation and replace with a new one if
necessary.
Drain Bolt
Remove the oil filter screen cap and then
remove the oil filter screen and spring.
Clean the oil filter screen with compressed
air.
Check the filter screen cap O-ring for
damage or deformation and replace if
necessary.
Install the oil filter screen, spring and filter
screen cap.
Torque: 1.5kg-m
Do not install the oil filter screen upside Oil Filter Screen Cap
down.
Oil Capacity: At disassembly : 1.0 liter
At change : 0.9 liter
Check for oil leaks and then start the engine
and let it idle for few minutes.
Stop the engine and recheck the oil level.
3-2
4.7 / 5