19. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS PEOPLE/PEOPLE S 250
Horn
HORN INSPECTION
Remove the front cover. ( 2-5)
Disconnect the horn wire couplers.
The horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.
Fuel Unit
FUEL UNIT
FUEL UNIT INSPECTION
Remove the fuel unit.
Disconnect the fuel unit wire connectors.
Measure the resistance between the fuel unit
wire terminals with the float at upper and
lower positions.
Wire Terminals Upper Lower
Y/WG 9.19.3 9596
Electric tester: YF-3501
Fuel Unit Fuel Full
FUEL METER INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Check the fuel meter for correct indication by
moving the fuel unit float up and down.
Upper
Float Position Display
Upper Much (Full)
Lower Less (Empty)
Wire Terminals Display
Free From Much to Less
Apply From Less to Much
The fuel meter is normal if it operates as
above indicated. If not, check for loosely
tightened nuts, poorly connected terminals or
shorted wires. Lower Fuel Empty
19-5
4.7 / 5