3. INSPECTION/ADJUSTMENT PEOPLE/PEOPLE S 250 Oil Check Bolt Hole/Oil Filler FINAL REDUCTION GEAR OIL · Place the scooter on its main stand on level ground. Stop the engine and remove the oil checks bolt. The oil level shall be at the oil check blowhole. If the oil level is low, add the recommended oil SAE90# to the proper level. Install the oil check bolt. Oil Drain Bolt/Sealing Washer · Make sure that the sealing washer is in good condition. GEAR OIL CHANGE Remove the oil check bolt. Removes the oil drains bolt and drain the oil thoroughly. Install the oil drain bolt. Torque: 9.8N-m · Make sure that the sealing washer is in good condition. Fill the final reduction with the recommended oil SAE90#. Gear Oil Capacity: At disassembly : 230cc At change : 180cc Reinstall the oil check bolt and check for oil leaks. DRIVE BELT Remove the left crankcase cover. Inspect the drive belt for cracks or excessive wear. Replace the drive belt with a new one if necessary and in accordance with the Maintenance Schedule. Drive Belt 3-8