10. A.C. GENERATOR/STARTER CLUTCH PEOPLE/PEOPLE S 250 Screws Screws STATOR INSTALLATION Install the A.C. generator stator on the right crankcase cover and secure it with the three bolts. Install the pulser coil on the right crankcase cover and secure it with the two screws. Install the wire grommet in the groove in the right crankcase cover securely. Be sure to route the stator wire under the pulser coil. A.C. Generator Stator Pulser Coil Gasket RIGHT CRANKCASE COVER INSTALLATION Install the two dowel pins and a new gasket. Dowel Pins Install the right crankcase cover over the Right Crankcase Cover crankcase, aligning the water pump shaft groove with the oil pump shaft. Water Pump Shaft Oil Pump Shaft Tighten the nine right crankcase cover bolts. Connect the water hoses to the right crankcase cover and water pump cover. Add the recommended engine oil. ( 4-3) Fill the cooling system with the specified coolant. ( 3-9) · Be sure to bleed air from the water jacket after filling the coolant. 10-9