4. LUBRICATION SYSTEM PEOPLE/PEOPLE S 250 Oil Dipstick ENGINE OIL/OIL FILTER · Place the scooter upright on level ground for engine oil level check. · Run the engine for 23 minutes and check the oil level after the engine is stopped for 23 minutes. Remove the oil dipstick and check the oil level with the oil dipstick. If the level is near the lower level, fill to the upper level with the recommended engine oil. OIL CHANGE · The engine oil will drain more easily while the engine is warm. Remove the oil drain bolt located at the left side of the engine to drain the engine oil. After the oil has been completely drained, install the aluminum washer and tighten the oil drain bolt. Torque: 14.7N-m Pour the recommended oil through the oil filler hole. Oil Drain Bolt OIL FILTER SCREEN Drain the engine oil. Remove the oil filter screen cap. Remove the oil filter screen and spring. Check the oil filter screen for clogging or damage and replace if necessary. Check the filter screen O-ring for damage and replace if necessary. Install the oil filter screen, spring, O-ring and filter screen cap. Torque: 12.7N-m Recommended Oil: SAE15W40# API: SJ Oil Filter Screen Cap Oil Capacity: Spring At disassembly: 1.1 liter At change: 0.9 liter Start the engine and check for oil leaks. Start the engine and let it idle for few minutes, then recheck the oil level. Oil Filter Screen 4-3