zing 125 qe Werkstatthandbuch : Seite 131

          13. HYDRAULIC BRAKE                                                        ZING125


                                                                       Fluid Tube Bolt
 ASSEMBLY
 Install the main piston and snap ring.
 Install the rubber cover.
 Install the brake lever.




 Place the brake master cylinder on the
 handlebar and install the master cylinder
 holder with the "UP" mark facing up,
 aligning the tab on the holder with the hole
 in the handlebar.
 First tighten the upper bolt and then tighten
 the lower bolt.
 Torque: 1.01.4kg-m


                                                  "UP" Mark


 Install the brake fluid tube with the bolt and
 two sealing washers. Then, install the
 rearview mirror.
 Fill the brake reservoir with recommended
 brake fluid to the upper level.
 Bleed air from the hydraulic brake system.
 (Refer to 13-3.)



                                                         Sealing Washers    Bolt




                                                                                13-6