agility 50 rs naked 2t 1 Werkstatthandbuch : Seite 168

          15. ELECTRICAL EQUIPMENT                                                AGILITY RS 50 NAKED




 CDI UNIT INSPECTION
 Remove the front cover.
 Disconnect the CDI coupler and remove the
 CDI unit.




                                                             CDI Unit



 CDI CIRCUIT INSPECTION
 Measure the resistance between the                   Blue/ Yellow
 terminals.                                                             Black/Blue
 Replace the CDI unit if the readings are not
 within the specifications in the table below.
· Due to the semiconductor in circuit, it is
     necessary to use a specified tester for
     accurate testing. Use of an improper
     tester in an improper range may give
     false readings.
   · Use a Sanwa Electric Tester or Kowa
     Electric Tester (TH-5H).
   · In this table, "Needle swings then
     returns" indicates that there is a charging
     current applied to a condenser. The needle                                            Violet/Red
     will then remain at "  " unless the            Violet/ Black           Black / Blue
     condenser is discharged.                                  Green

                                                                        Green/ Black
 Use the x K range for the Sanwa Tester.
 Use the x 100 range for the Kowa Tester.

                                Unit: 
  Probe             Blue/              Black/
            Black            Green
 (-)Probe           Yellow             Yellow

  Black             4~7M 4~7M 2~3M

  Blue/
         15~20K              600~900   1000~1500K
  Yellow

  Green     15~20M 600~900             4~7M

  Black/
                               
  Yellow

                                                                                           15-10