5. FUEL INJECTION SYSTEM
MOVIE S 150i
Screws
FUEL PUMP REMOVAL
Remove the six screws onto the fuel pump.
Disconnect the connector and fuel band
from the fuel pump.
Remove the fuel pump and O-ring
Apply the sealant onto the O ring when
installation.
Fuel Pump Connector
INSTALLATION
Place a new O-ring onto the fuel tank.
Be careful not damage the fuel pump wire
and ensure the connector rearward.
Tighten the six screws.
O-ring
INSPECT BY MULTI-METER
Turn the ignition switch to OFF position.
Disconnect the fuel pump/fuel unit
connector.
Turn the ignition switch to ON position.
Connect the multi-meter (+) probe to the
Red/Black terminal and the multi-meter (-)
probe to the Green terminal with a multi-
meter.
Standard: 8 ~ 16 V Connector
INSPECTION
To measure the resistance if connection for
two pins of fuel pump.
If no connection or resistance is too big,
please replace a new one.
Standard: 1.9
5-28
4.7 / 5