people 125 Werkstatthandbuch : Seite 35

          3. INSPECTION/ADJUSTMENT                                                     PEOPLE 125/150

       Adjusting Nut

 AIR CLEANER                                                       Screws
 AIR CLEANER REPLACEMENT
 Remove the rear side covers. ( 2)
 Remove the six air cleaner case cover screws
 and the cover.

 Remove the air cleaner element by removing
 the three screws.
 Check the element and replace it if it is
 excessively dirty or damaged.

                                                    Air Cleaner Case Cover
                                                                        Air Cleaner Element
 CHANGE INTERVAL
 More frequent replacement is required when
 riding in unusually dusty or rainy areas.

   · The air cleaner element has a viscous
     type paper element. Do not clean it
     with compressed air.
   · Be sure to install the air cleaner
     element and cover securely.



                                                                       Screws

 SPARK PLUG
 Remove the spark plug.
 Check the spark plug for wear and fouling
 deposits.
 Clean any fouling deposits with a spark plug
 cleaner or a wire brush.
 Specified Spark Plug: NGK            C7HSA




 Measure the spark plug gap.
 Spark Plug Gap: 0.6 0.7mm

   When installing, first screw in the spark                                Cracks
                                                                            Damage
   plug by hand and then tighten it with a
   spark plug wrench.                                                       Washer
                                                                            Deformation
                                                Gap, Wear, and
                                                Fouling Deposits


                                                                                          3-4