13. STEERINGHANDLEBAR/FRONTWHEEL/FRONT BRAKE/FRONTSHOCKABSORBER/FRONTFORK Outer Driver, 37x40mm Drive in new ball races. Be sure to drive the ball races into place completely. Outer Driver, 37x40mm Top Cone Race INSTALLATION Apply grease to the top and bottom ball races and install 26 steel balls on the top ball race and 19 steel balls on the bottom ball race. Then, install the front fork. Ball Race Apply grease to the top cone race and install it. Tighten the top cone race and then turn the steering stem right and left several times to make steel balls contact each other closely. Check that the steering stem rotates freely without vertical play. Lock Nut Wrench Install the steering stem lock nut and tighten it while holding the top cone race. Torque: 8.012.0kg-m Install the front wheel. ( 13-7) Install the front brake caliper. ( 13-12) Install the front inner fender. ( 2-6) Install the throttle grip and the right and left handlebar switches.( 13-5) Install the right and left brake master cylinders. ( 13-5) Lock Nut Wrench 13-18