1. GENERAL INFORMATION ATV 300/250 SPECIFICATIONS (MAXXER 250/MONGOOSE 250) Model No. LA50 Air cleaner type & No Sponge MXER 250R 13 L (2.73 lmp gal, ATV Name & Type Fuel capacity Fuel System MAXXER 250 3.38 US gal) Overall length 1705 mm (68.2 in) Type PTG Carburetor Overall width 1020 mm (40.1 in) Main jet NO. 98 Overall height 1110 mm (43.3 in) Venturi dia. 22 mm (0.88 in) Wheel base 1175 mm (46.2 in) Throttle type PISTON Engine type O.H.C. Full transistor Electrical Equipment Ignition System Type Displacement 249 cm3 (15.2 cu-in) digital ignition 92# nonleaded Ignition timing 5°BTDC/1000 rpm Fuel Used gasoline Spark plug DPR7EA-9 Front wheel 93.1 kg (204.8 lbs) Dry weight Rear wheel 84.9 kg (186.8 lbs) Spark plug gap 0.60.7 mm Total 178 kg (391.6 lbs) (0.0020.003 in) Front wheel 100 kg (220 lbs) Battery Capacity 12V12AH Gross weight Rear wheel 91 kg (200.2 lbs) Dry, centrifugal Clutch Type automatic Total 191 kg (420.2 lbs) Drive System Front wheel 21*7-10 Clutch operation system Automatic (V-belt) Tires Helical gear/spur Rear wheel 20*11-9 Primary reduction system gear Ground clearance 130 mm (5.1 in) Secondary reduction system Chain drive Starting system Starting motor Primary reduction ratio 26.5 Type Gasoline, 4-stroke Secondary reduction ratio 10.02 Cylinder arrangement Single cylinder Reverse ratio 50.9 Combustion chamber type Semi-sphere Valve arrangement O.H.C., chain drive FR/RR tire rolling 1675/1596 mm Moving Device circumference 67/63.8 in) 72.7 x 60 mm Bore x stroke (2.9 x 2.4 in) Front 0.28 kgf/cm2 (28 Tire pressure Compression ratio 10.3:1 Rear kPa, 3.2 psi) 15 kgf/cm2 (1500 kPa, Turning Left 40° Compression pressure 213 psi) angle Right 40° Open 8.1° BTDC Rear Disk brake Intake valve Brake system type Close 41° ABDC Front Disk brake Engine Open 37° BBDC Exhaust valve Front Double wishbone Close 7.9° ATDC Suspension type Valve clearance Intake 0.1 mm (0.004 in) (cold) Rear Link suspension Exhaust 0.1 mm (0.004 in) Idle speed 1500 rpm Frame type Steel tube frame Lubrication type Forced pressure & Lubrication System Wet sump Oil pump type Inner/outer rotor type Oil filter type Full-flow filtration 1.6 L (1.4 lmp qt, 1.7 Oil capacity US qt) Oil exchanging 1.4 L (1.23 lmp qt, capacity 1.48 US qt) Cooling Type Liquid cooling 1-2