spacer 50 125 1 Werkstatthandbuch : Seite 52

          3. INSPECTION/ADJUSTMENT

 ELECTRICAL EQUIPMENT
 IGNITION APPARATUS                               Gap, Wear and
                                                  Fouling Deposits
 Spark Plug
 Remove the frame center cover.
 Remove the spark plug cap and spark plug.
 Check the spark plug for wear, fouling and
 carbon deposits.                                                              Washer Damage
 Remove the fouling and carbon deposits
 with a spark plug cleaner or wire brush.
 Specified Spark Plug                                    Cracks
               NGK
    SH10AA.          SH10BA.
    BR6HSA           BR8HSA
                                                                        Bolt
 Spark Plug Gap: 0.60.7mm
 Ignition Apparatus
The CDI ignition timing is not adjust-
   able. If the timing is incorrect, check
   the CDI unit, ignition coil and A.C.
   generator and replace any faulty parts.

 Remove the right side rail. ( 2-4)
 Remove the three bolts attaching the right
 crankcase cover and the cover.




                                                                  Index Mark

 When the engine is running at the specified
 rpm, the ignition timing is correct if the "F"
 mark on the flywheel aligns with the index
 mark on the crankcase within 2°.
 Ignition Timing:
  SH10BA.: 13.5°2°BTDC/2000rpm
  SH10AA.: 13.5°2°BTDC/2000rpm




                                                                   F Mark



                                                                                        3-8