spacer 50 125 1 Werkstatthandbuch : Seite 56

Microfiches
Image preview

Seite 54

Image preview

Seite 55

Image preview

Seite 57

Image preview

Seite 58

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 232
          3. INSPECTION/ADJUSTMENT
 FUEL SYSTEM
 Throttle Grip Free Play
 Measure the throttle grip free play.
 Free Play: 26mm
 If the throttle grip free play does not fall
 within the specified range, adjust by
 loosening the lock nut and turning the
 adjusting nut.
 OTHERS
 LIGHTS
 Headlight
 Adjust the headlight beam by loosening the
 headlight adjusting bolt and moving the
 adjusting bolt forward and backward to a
 proper position. Tighten the adjusting
 bolt.


 COOLING SYSTEM
COOLANT LEVEL INSPECTION
Place the motorcycle on its main stand on
level ground.
Check the coolant level of the reserve tank
and the level should be between the upper
and lower level lines.
If necessary, fill the reserve tank with
recommended coolant to the "F" level line.
Recommended Coolant: SIGMA Coolant
              (Standard Concentration 30%)
 · The coolant level does not change no
     matter the engine is warm or cold. Fill
     to the "F" (upper) line.


                                                 Upper Line
 COOLANT REPLACEMENT
 · Perform this operation when the engine
     is cold.
 Remove the front cover.
 Remove the radiator cap.
 Remove the water hose to drain the coolant
 and tilt the motorcycle to the right and the
 coolant will drain more easily.
 Drain the coolant in the reserve tank.
 Reinstall the water hose.
 Fill the radiator with the specified coolant.
 · The coolant freezing point should be 5
      lower than the temperature of the            Lower Line
     riding area.


                                                                3-12