16. BATTERY/CHARGING SYSTEM RESISTOR INSPECTION Remove the frame front cover. ( 2-3) Measure the resistance between the resistor B pink wire and ground. Measure the resistance between the resistor A green/black wire and ground. Resistances: Resistor A: 9.910.5 Resistor B: 5.66.2 Faulty resistor is the cause of faulty operation of the auto bystarter. Resister A Resister B REGULATOR/RECTIFIER INSPECTION Bolt Remove the frame body cover. ( 2-3) Disconnect the regulator/rectifier wire coupler and remove the bolt to remove the regulator/rectifier. Measure the resistances between the terminals. Replace the regulator/rectifier if the readings are not within the specifications in the table below. · Due to the semiconductor in circuit, it is necessary to use a specified tester for accurate testing. Use of an Coupler Regulator/Rectifier improper tester in an improper range may give false readings. · Use a Sanwa Electric Tester (07208- C (Yellow) 0020000) or Kowa Electric Tester A (Red) (TH-5H). The proper range for testing is listed below. Model Brand Range SP-10D Sanwa K TH-5H Kowa 100 Probe Probe(-) A (R) B (W) C (Y) D (G) A (R) B (W) 3-10K B (White) D (Green) C (Y) 33-35K D (G) 33-35K 16-6